FrSky SBUS & CPPM Decoder

Regular price$12.40
/
Shipping calculated at checkout.

  • Low stock - 1 item left
  • Inventory on the way

>>>BIG NOTE<<<

As of Jan 2024 FrSky does not offer a method to program this decoder. They should have some options for this in the near future, but for now you need to locate a FrSky Servo Channel Changer device to program these. In the future FrSky should allow us to program these from our Ethos and OpenTX radios. 

The FrSky SBUS & CPPM Decoder allows you to connect normal servos to your SBUS or CPPM systems.

The FrSky SBUS & CPPM Decoder can be used to decode SBUS or CPPM signals and converts them to PWM signals for use with conventional analog and digital servos.

Compatible with receivers that feature the SBUS port. Some examples are the FrSky TFRSB 9TFR4SB, TFR8SB) and X series (X8R, X6R) receivers and the Futaba S.BUS receivers (R6208SB, and others) as well as tools like the FrSky SBUS Servo Channel Changer and the Futaba SBC-1.

Specs:

Channel Output Cable Lengths: 210mm
Total length: 350mm
Operating Temperature Range: -10-80℃
Operating Voltage Range: 4-10V
Compatibility for SBUS Connection Port: FrSky SBUS Servo Channel Changer, FrSky TFR8SB receiver, Futaba SBC-1 or Futaba S.BUS receivers (R6208SB, etc.)
Compatibility for PWM Connection Ports: digital servos

NOTE: Will pass the Sbus framerate to the servo (PWM) output. Typically this will be about a 9ms frame rate, these faster frame rates will work best with digital servos, though some analog servos appear to be OK. Analog servos are not recommended.

FrSky SBUS & CPPM Decoder
FrSky SBUS & CPPM Decoder
FrSky SBUS & CPPM Decoder
FrSky SBUS & CPPM Decoder